Title: Atmospheric data from an Airmar 150WX weather station at OBSEA Buoy (30min average)

Summary:
Atmospheric data collected by an Airmar 150WX weather station at OBSEA Buoy averaged every 30min

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CAPH (Atmospheric pressure, Hectopascals)
AIRT (temperature of the atmoshpere, Degrees Celsius)
WDIR (wind direction, Degrees)
WSPD (wind speed, Metres per second)
CAPH_QC (Atmospheric pressure quality control flags)
AIRT_QC (temperature of the atmoshpere quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)

Institution: Polytechnic University of Catalonia


Title: Atmospheric data from an Airmar 150WX weather station at OBSEA Buoy (full data)

Summary:
Atmospheric data collected by an Airmar 150WX weather station at OBSEA Buoy, full sensor data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CAPH (Atmospheric pressure, Hectopascals)
AIRT (temperature of the atmoshpere, Degrees Celsius)
WDIR (wind direction, Degrees)
WSPD (wind speed, Metres per second)
CAPH_QC (Atmospheric pressure quality control flags)
AIRT_QC (temperature of the atmoshpere quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Summary:
Biogeochemical time series at OBSEA moored buoy aggregated (30min averages)

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
ALKY (Minus the log of the hydrogen ion concentration (moles per litre) in the water column., pH units)
CDOM (The quantity of coloured organic compounds in solution in unit volume of any body of water, ppb)
CNDC (sea water electrical conductivity, S/m)
COIL (crude oil in sea water, ppb)
DOXY (saturation of oxygen in sea water, %)
RFUL (refined fuels in sea water, ppm)
TEMP (in situ sea water temperature, degC)
TURB (Turbidity of water in the water body, NTU)
WBRX (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species, mV)
ALKY_QC (Minus the log of the hydrogen ion concentration (moles per litre) in the water column. quality control flags)
CDOM_QC (The quantity of coloured organic compounds in solution in unit volume of any body of water quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
COIL_QC (crude oil in sea water quality control flags)
DOXY_QC (saturation of oxygen in sea water quality control flags)
RFUL_QC (refined fuels in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
TURB_QC (Turbidity of water in the water body quality control flags)
WBRX_QC (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species quality control flags)
C3_SN2300642 (Turner designs C3 submersible fluorometer)
SA8065_SN0000 (B&C Electronics SA8065.101 multiparameter probe)
OBSEA_Besos_Buoy (OBSEA Buoy on top of the seafloor observatory)
OBSEA_Buoy (OBSEA Buoy on top of the seafloor observatory)

Institution: UPC - Universitat Politècnica de Catalunya


Title: CTD data at OBSEA Underwater Observatory (30min average)

Summary:
CTD data measured at OBSEA underwater observatory

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
sensor_id (Identifier of the sensor that took the measurement)
CNDC (sea water electrical conductivity, Siemens per metre)
PSAL (sea water salinity, Dimensionless)
TEMP (in situ sea water temperature, Degrees Celsius)
SVEL (speed of sound in sea water, Metres per second)
PRES (pressure that exists in the medium of sea water, Decibars)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Title: CTD data at OBSEA Underwater Observatory (full data)

Summary:
CTD data measured at OBSEA underwater observatory full data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
sensor_id (Identifier of the sensor that took the measurement)
TEMP (in situ sea water temperature, Degrees Celsius)
PRES (pressure that exists in the medium of sea water, Decibars)
CNDC (sea water electrical conductivity, Siemens per metre)
PSAL (sea water salinity, Dimensionless)
SVEL (speed of sound in sea water, Metres per second)
TEMP_QC (in situ sea water temperature quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Summary:
CTD data measured at OBSEA underwater observatory full data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CNDC (sea water electrical conductivity (corrected values), Siemens per metre)
PSAL (sea water salinity (raw sensor values), Dimensionless)
TEMP (in situ sea water temperature (corrected values), Degrees Celsius)
PRES (pressure that exists in the medium of sea water (raw sensor values), Decibars)
SVEL (speed of sound in sea water (raw sensor values), Metres per second)
CNDC_RAW (sea water electrical conductivity (raw data), Siemens per metre)
CNDC_UNCERTAINTY (sea water electrical conductivity expanded uncertainty with 95% coverage (k=2), Siemens per metre)
TEMP_RAW (in situ sea water temperature (raw data), Degrees Celsius)
TEMP_UNCERTAINTY (in situ sea water temperature expanded uncertainty with 95% coverage (k=2), Degrees Celsius)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Title: Current data from an AWAC-AST 1 MHz ADCP at OBSEA (30min average)

Summary:
Current data collected and processed by an AWAC-SN5931-AST 1 MHz at OBSEA (30min average)

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CSPD (Horizontal velocity of the water column (currents), Metres per second)
CDIR (direction towards the sea water is flowing (currents), Degrees north)
UCUR (eastward velocity of water current in the water body, Metres per second)
VCUR (northward velocity of water current in the water body, Metres per second)
ZCUR (upward velocity of water current in the water body, Metres per second)
CSPD_QC (Horizontal velocity of the water column (currents) quality control flags)
CDIR_QC (direction towards the sea water is flowing (currents) quality control flags)
UCUR_QC (eastward velocity of water current in the water body quality control flags)
VCUR_QC (northward velocity of water current in the water body quality control flags)
ZCUR_QC (upward velocity of water current in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Title: Current data from an AWAC-AST 1 MHz ADCP at OBSEA (full data)

Summary:
Current data collected and processed by an AWAC-SN5931-AST 1 MHz at OBSEA (full data)

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CSPD (Horizontal velocity of the water column (currents), Metres per second)
CDIR (direction towards the sea water is flowing (currents), Degrees)
UCUR (eastward velocity of water current in the water body, Metres per second)
VCUR (northward velocity of water current in the water body, Metres per second)
ZCUR (upward velocity of water current in the water body, Metres per second)
CSPD_QC (Horizontal velocity of the water column (currents) quality control flags)
CDIR_QC (direction towards the sea water is flowing (currents) quality control flags)
UCUR_QC (eastward velocity of water current in the water body quality control flags)
VCUR_QC (northward velocity of water current in the water body quality control flags)
ZCUR_QC (upward velocity of water current in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Title: Data from Airmar 200 WX weather station deployed at OBSEA's Besos Buoy (30min average)

Summary:
Weather station from  an Airmar 200WX deployed at OBSEA's Besos Buoy, NW mediterranean sea

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CAPH (Atmospheric pressure, Hectopascals)
AIRT (temperature of the atmoshpere, Degrees Celsius)
WDIR (wind direction, Degrees)
WSPD (wind speed, Metres per second)
CAPH_QC (Atmospheric pressure quality control flags)
AIRT_QC (temperature of the atmoshpere quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Title: Data from Airmar 200 WX weather station deployed at OBSEA's Besos Buoy (full data)

Summary:
Weather station from  an Airmar 200WX deployed at OBSEA's Besos Buoy, NW mediterranean sea full sensor data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CAPH (Atmospheric pressure, Hectopascals)
AIRT (temperature of the atmoshpere, Degrees Celsius)
WDIR (wind direction, Degrees)
WSPD (wind speed, Metres per second)
CAPH_QC (Atmospheric pressure quality control flags)
AIRT_QC (temperature of the atmoshpere quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Title: Fluorometry data from a Turner Designs C3 sensor at OBSEA's Besos Buoy (30min average)

Summary:
Data collected by a Turner Designs C3-SN2300642 fluorometer mounted at the Besos Buoy, on top of the OBSEA observatory, 30min average

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CDOM (The quantity of coloured organic compounds in solution in unit volume of any body of water, Parts per billion)
COIL (crude oil in sea water, Parts per billion)
RFUL (refined fuels in sea water, Parts per million)
TEMP (in situ sea water temperature, Degrees Celsius)
CDOM_QC (The quantity of coloured organic compounds in solution in unit volume of any body of water quality control flags)
COIL_QC (crude oil in sea water quality control flags)
RFUL_QC (refined fuels in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Title: Fluorometry data from a Turner Designs C3 sensor at OBSEA's Besos Buoy (full data)

Summary:
Data collected by a Turner Designs C3-SN2300642 fluorometer mounted at the Besos Buoy, on top of the OBSEA observatory, full data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CDOM (The quantity of coloured organic compounds in solution in unit volume of any body of water, Parts per billion)
COIL (crude oil in sea water, Parts per billion)
RFUL (refined fuels in sea water, Parts per million)
TEMP (in situ sea water temperature, Degrees Celsius)
CDOM_QC (The quantity of coloured organic compounds in solution in unit volume of any body of water quality control flags)
COIL_QC (crude oil in sea water quality control flags)
RFUL_QC (refined fuels in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Title: Meteorological time series at OBSEA moored buoy (30min averages)

Summary:
Meteorological time series at OBSEA moored buoy, quality controlled data with 30-minute average, data from 2011-10-06 until now

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
AIRT (temperature of the atmoshpere, degC)
CAPH (Atmospheric pressure, hPa)
WDIR (wind direction, degree_north)
WSPD (wind speed, m/s)
AIRT_QC (temperature of the atmoshpere quality control flags)
CAPH_QC (Atmospheric pressure quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
Airmar_150WX_SN57323 (Airmar 150WX Weather Station)
Airmar_200WX_SN60390327 (Airmar 200WX IPX7 weather station)
OBSEA_Besos_Buoy (OBSEA Buoy on top of the seafloor observatory)
OBSEA_Buoy (OBSEA Buoy on top of the seafloor observatory)


Title: Physicochemical data from an SA8065 multiparameter probe at OBSEA's Besos Buoy (30min average)

Summary:
Physicochemical data collected by an SA8065-SN0000 multiparameter probe at the Besos Buoy, on top of the OBSEA observatory, 30min average

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
TEMP (in situ sea water temperature, Degrees Celsius)
CNDC (sea water electrical conductivity, Siemens per metre)
DOXY (saturation of oxygen in sea water, Percent)
ALKY (Minus the log of the hydrogen ion concentration (moles per litre) in the water column., pH units)
WBRX (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species, Millivolts)
TURB (Turbidity of water in the water body, Nephelometric Turbidity Units)
depth_QC (depth of measurements quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
DOXY_QC (saturation of oxygen in sea water quality control flags)
ALKY_QC (Minus the log of the hydrogen ion concentration (moles per litre) in the water column. quality control flags)
WBRX_QC (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species quality control flags)
TURB_QC (Turbidity of water in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Title: Physicochemical data from an SA8065 multiparameter probe at OBSEA's Besos Buoy (full data)

Summary:
Physicochemical data collected by an SA8065-SN0000 multiparameter probe at the Besos Buoy, on top of the OBSEA observatory, full sensor data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
TEMP (in situ sea water temperature, Degrees Celsius)
CNDC (sea water electrical conductivity, Siemens per metre)
DOXY (saturation of oxygen in sea water, Percent)
ALKY (Minus the log of the hydrogen ion concentration (moles per litre) in the water column., pH units)
WBRX (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species, Millivolts)
TURB (Turbidity of water in the water body, Nephelometric Turbidity Units)
depth_QC (depth of measurements quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
DOXY_QC (saturation of oxygen in sea water quality control flags)
ALKY_QC (Minus the log of the hydrogen ion concentration (moles per litre) in the water column. quality control flags)
WBRX_QC (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species quality control flags)
TURB_QC (Turbidity of water in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Title: SPL data from a Naxys Hydrophone at OBSEA (30min average)

Summary:
Sound Pressure Level (ambient noise) from hydrophone data collected at OBSEA by a Naxys Ethernet 02345 Hydrophone and processed in real-time using the SWE Bridge software, 30min average. The SPL values are calculated with a time-window of 10 seconds.

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
SPL_ALL
SPL_63 (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_125 (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_2000 (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_ALL_QC
SPL_63_QC (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_125_QC (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_2000_QC (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Title: SPL data from a Naxys Hydrophone at OBSEA (full data)

Summary:
Sound Pressure Level (ambient noise) from hydrophone data collected at OBSEA by a Naxys Ethernet 02345 Hydrophone and processed in real-time using the SWE Bridge software, full data.  The SPL values are calculated with a time-window of 10 seconds.

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
SPL_ALL
SPL_63 (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_125 (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_2000 (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_ALL_QC
SPL_63_QC (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_125_QC (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_2000_QC (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Title: Temperature and salinity time series at OBSEA seabed observatory (30min averages)

Summary:
Temperature and salinity time series at OBSEA seabed observatory, quality controlled data aggregated every 30min

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CNDC (sea water electrical conductivity, S/m)
PRES (pressure that exists in the medium of sea water, dbar)
PSAL (sea water salinity, Dmnless)
SVEL (speed of sound in sea water, m/s)
TEMP (in situ sea water temperature, degC)
CNDC_QC (sea water electrical conductivity quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
PSAL_QC (sea water salinity quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
SBE16_SN57353_6479 (SBE 16 Plus V2)
SBE37SI_SN37_24580 (SBE37 CTD sensor at OBSEA)
SBE37SMP_SN47472_5496 (CTD SBE37 at OBSEA)
OBSEA (OBSEA Expandable Seafloor Observatory (WMO number 6103565))


Title: Temperature and salinity time series at OBSEA seabed observatory (quality-controlled)

Summary:
Temperature and salinity time series at OBSEA seabed observatory, quality controlled

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CNDC (sea water electrical conductivity, S/m)
PRES (pressure that exists in the medium of sea water, dbar)
PSAL (sea water salinity, Dmnless)
SVEL (speed of sound in sea water, m/s)
TEMP (in situ sea water temperature, degC)
CNDC_QC (sea water electrical conductivity quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
PSAL_QC (sea water salinity quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
SBE16_SN57353_6479 (SBE 16 Plus V2)
SBE37SI_SN37_24580 (SBE37 CTD sensor at OBSEA)
SBE37SMP_SN47472_5496 (CTD SBE37 at OBSEA)
OBSEA (OBSEA Expandable Seafloor Observatory (WMO number 6103565))


Title: Wave data from an AWAC-AST 1 MHz ADCP at OBSEA

Summary:
Wave data collected and processed by an AWAC-SN5931-AST 1 MHz at OBSEA

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
VHM0 (spectral significant wave height of waves by acoustic doppler wave array, Metres)
VAVH (Wave height mean of waves (highest one third) on the water body by acoustic doppler wave array, Metres)
VH110 (Wave height mean of waves (highest one tenth) on the water body by acoustic doppler wave array, Metres)
VZMX (wave height maximum of waves on the water body by acoustic doppler wave array, Metres)
VTM02 (period mean of waves on the water body by acoustic doppler wave array , Seconds)
VTPK (Period at spectral maximum of waves (peak period Tp) on the water body by acoustic doppler wave array, Seconds)
VTZA (Zero-crossing period of waves {Tz} on the water body by acoustic doppler wave array, Seconds)
VPED (Direction (from) at spectral maximum of waves on the water body by acoustic doppler wave array, Degrees)
VMDR (Direction (from) mean of waves (mean wave direction) on the water body by acoustic doppler wave array, Degrees)
UNDX (Unidirectivity index of waves on the water body by acoustic doppler wave array, Dimensionless)
VHM0_QC (spectral significant wave height of waves by acoustic doppler wave array quality control flags)
VAVH_QC (Wave height mean of waves (highest one third) on the water body by acoustic doppler wave array quality control flags)
VH110_QC (Wave height mean of waves (highest one tenth) on the water body by acoustic doppler wave array quality control flags)
VZMX_QC (wave height maximum of waves on the water body by acoustic doppler wave array quality control flags)
VTM02_QC (period mean of waves on the water body by acoustic doppler wave array  quality control flags)
VTPK_QC (Period at spectral maximum of waves (peak period Tp) on the water body by acoustic doppler wave array quality control flags)
VTZA_QC (Zero-crossing period of waves {Tz} on the water body by acoustic doppler wave array quality control flags)
VPED_QC (Direction (from) at spectral maximum of waves on the water body by acoustic doppler wave array quality control flags)
VMDR_QC (Direction (from) mean of waves (mean wave direction) on the water body by acoustic doppler wave array quality control flags)
UNDX_QC (Unidirectivity index of waves on the water body by acoustic doppler wave array quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)